On a class of generalised Schmidt groups

Annali di Matematica Pura ed Applicata (1923 -) - In this paper families of non-nilpotent subgroups covering the non-nilpotent part of a finite group are considered. An $$A_5$$ -free group...     

Promotion Effect of Bismuth on Nickel Electrodeposition and Its Electrocatalysis to Glucose Oxidation

Metallic Bi and Ni were co‐deposited onto the surface of glass carbon electrode (GCE) from the electrolyte solution containing their respective nitrate to fabricate a Bi/Ni alloy modified GCE (Bi/Ni‐GCE). The purpose is to study the influence of Bi³⁺ on the deposition of Ni and that of deposited Bi on the electrocatalytic performance of Ni to glucose in alkali solution. The results show that both redox signal of Ni(OH)₂/NiOOH and Ni(OH)₂/NiOOH mediated electrocatalysis to glucose is remarkably increased in the presence of Bi. It seems that there is a synergistic effect between Bi and Ni on each other’s redox electrochemistry. It’s possible that the firstly deposited Bi on GCE surface helps to the following nucleation and growth of Ni, leading to the deposition of more metallic Ni on GCE surface. An extremely attractive feature of Bi/Ni‐GCE is reflected by the fast response time to the electrocatalytic oxidation of glucose. The electrode nearly responses immediately after glucose is added and it reaches a steady‐state level within only 2 seconds, demonstrating a good electrocatalytic property of Bi/Ni‐GCE. The calibration plot is linear over the wide concentration range of 0–5.8 mM with a sensitivity of 33.96 µA/mM and a correlation coefficient of 0.9985. The detection limit of the glucose was found to be 0.59 µM at a signal‐to‐noise ratio of 3. The fabricated Bi/Ni‐GCE was successfully employed to analyze the glucose level in blood samples, exhibiting high accuracy, strong resistance against inference and good reliability in the practical applications.     

Structural elucidation of new urinary tamoxifen metabolites by liquid chromatography quadrupole time‐of‐flight mass spectrometry

In this study, tamoxifen metabolic profiles were investigated carefully. Tamoxifen was administered to two healthy male volunteers and one female patient suffering from breast cancer. Urinary extracts were analyzed by liquid chromatography quadruple time‐of‐flight mass spectrometry using full scan and targeted MS/MS techniques with accurate mass measurement. Chromatographic peaks for potential metabolites were selected by using the theoretical [M + H]⁺ as precursor ion in full‐scan experiment and m/z 72, 58 or 44 as characteristic product ions for N,N‐dimethyl, N‐desmethyl and N,N‐didesmethyl metabolites in targeted MS/MS experiment, respectively. Tamoxifen and 37 metabolites were detected in extraction study samples. Chemical structures of seven unreported metabolites were elucidated particularly on the basis of fragmentation patterns observed for these metabolites. Several metabolic pathways containing mono‐ and di‐hydroxylation, methoxylation, N‐desmethylation, N,N‐didesmethylation, oxidation and combinations were suggested. All the metabolites were detected in the urine samples up to 1 week. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of CuI Trifluoromethylselenates for Trifluoromethylselenolation of Aryl and Alkyl Halides

The development of new strategies for synthesis of trifluoromethylthiolate compounds is of considerable importance in pharmaceuticals, agrochemicals, and advanced materials. Accordingly, currently much attention is being devoted to the development of effective methods and reagents for their synthesis. In contrast, considerably less effort has been afforded to the development of preparing C?SeCF₃ bonds. Herein we report a concise route to synthesize a family of copper(I) trifluoromethylselenolate reagents by the reaction of CuI with the Ruppert’s reagent (Me₃SiCF₃), KF, and elemental selenium in the presence of dinitrogen ligands in CH₃CN at room temperature. The reagent [Cu(bpy)(SeCF₃)]₂ was proven to be air‐stable and highly efficient for nucleophilic trifluoromethylthselenolation of a broad range of (hetero)aryl halides and alkyl halides. This method represents a powerful protocol for the construction trifluoromethylselenolate compounds.     

Phase behavior of amphiphiles at liquid crystals/water interface: A coarse-grained molecular dynamics study

We present a coarse-grained molecular dynamics simulation study of phase behavior of amphiphilic monolayers at the liquid crystal （LC）/water interface. The results revealed that LCs at interface can influence the lateral ordering of amphiphiles. Particularly, the amphiphile tails along with perpendicularly penetrated LCs between tails undergo a two-dimension phase transition from liquid-expanded into a liquid-condensed phase as their area density at interface reaches 0.93. While, the liquid-condensed phase of the monolayer never appears at oil/water interface with isotropic shape oil particles. These findings reveal the penetration of anisotropic LC can promote ordered lateral organization of amphiphiles. Moreover, we find the phase transition point is shifted to lower surface coverage of amphiphiles when the LCs have larger affinity to the amphiphile tails.     

DNA Nanoribbon-Templated Self-Assembly of Ultrasmall Fluorescent Copper Nanoclusters with Enhanced Luminescence

Fluorescent copper nanoclusters (CuNCs) have been widely used in chemical sensors, biological imaging, and light-emitting devices. However, individual fluorescent CuNCs have limitations in their capabilities arising from poor photostability and weak emission intensities. As one kind of aggregation-induced emission luminogen (AIEgen), the formation of aggregates with high compactness and good order can efficiently improve the emission intensity, stability, and tunability of CuNCs. Here, DNA nanoribbons, containing multiple specific binding sites, serve as a template for in situ synthesis and assembly of ultrasmall CuNCs (0.6 nm). These CuNC self-assemblies exhibit enhanced luminescence and excellent fluorescence stability because of tight and ordered arrangement through DNA nanoribbons templating. Furthermore, the stable and bright CuNC assemblies are demonstrated in the high-sensitivity detection and intracellular fluorescence imaging of biothiols.     

Water-Soluble Polymers with Appending Porphyrins as Bioinspired Catalysts for the Hydrogen Evolution Reaction

Molecular design to improve catalyst performance is significant but challenging. In enzymes, residue groups that are close to reaction centers play critical roles in regulating activities. Using this bioinspired strategy, three water-soluble polymers were designed with appending Co porphyrins and different side-chain groups to mimic enzyme reaction centers and activity-controlling residue groups, respectively. With these polymers, high hydrogen evolution efficiency was achieved in neutral aqueous media for electro- (turnover frequency >2.3×10⁴ s⁻¹) and photocatalysis (turnover number >2.7×10⁴). Porphyrin units are surrounded and protected by polymer chains, and more importantly, the activity can be tuned with different side-chain groups. Therefore, instead of revising molecular structures that is difficult from both design and synthesis points of view, polymers can be used to improve molecular solubility and stability and simultaneously regulate activity by using side-chain groups.     

基于手机光线传感器为检测器的简易光度计的自组装设计

By using light sensors of the cellphone, we build a simple photometer which can be used in quantitative analysis experiments. We have performed 5 replicate measurements of iron with phenanthroline to verify reproducibility and stability. We find the absorbance of the sample has a good linear relationship with the concentrations of iron with a R² value around 0.999 and the RSD of 2.81%. The result is 4.94 μg·mL^-1 with spectrophotometer and 5.11 μg·mL^-1 with our photometer. The photometer is simple, convenient, accurate and realistic by using a phone as detector, which can replace the traditional spectrophotometer in the laboratory class. The students can enhance their understanding of the structure and principle of spectrophotometer by the DIY photometer experiment.     

手性环丙烯构建策略用于对映选择性合成偕二氟亚甲基三元环化合物

作为最小的不饱和环状分子,环丙烯独特的刚性结构和多变的反应活性吸引了化学家的研究兴趣.自1922年Demjanov[1]报道了环丙烯化合物的首例合成以来,现已发展了一系列环丙烯的合成方法.手性环丙烯的合成是通过炔烃和重氮化合物的[2+1]不对称环加成反应.根据底物的不同,这些不对称环加成反应可以分为四类:(a)末端炔烃和单取代重氮化合物的反应,(b)末端炔烃和双取代重氮化合物的反应,(c)非末端炔烃和双取代重氮化合物的反应,(d)非末端炔烃和单取代重氮化合物的反应.在这四类反应中,末端炔烃和单取代重氮化合物的不对称反应相对容易进行.1992年,Doyle和Müller等[2]报道了手性铑催化剂[Rh2(5R-MEPY)4]促进的末端炔烃和重氮醋酸酯之间的不对称环丙烯基化反应(Scheme 1a).随后各种手性催化剂包括[Rh2(OAc)-(DPTI)3][3]、Ir(salen)衍生物[4]和[Co(3,5-diMes-Chen-Phyrin)][5]等被先后报道用于末端炔烃和单取代重氮化合物的不对称[2+1]环加成反应.